2026-10-13 Wired Headphones are Superior to Bluetooth Heapdhones
So basically the title. Of course, I should probably expound a bit.
Firstly, advantages of wired headphones when compared with Bluetooth (aka wireless) headphones. To start, let's talk about the process. First your phone has audio data of some sort. With wired headphones the audio data is turned into audio which is then used to drive some very small speakers in your ear. That's it.
With Bluetooth, the process is more complex. The phone first has to read the data, transfer it via a Bluetooth radio to your headphones, the headphones then have to decode that transmission and turn it into audio. It's not much, but those steps are more complicated, they use more power, your transmission is broadcast to everyone in your vicinity, and it's not backwards compatible.
Complexity
So, let's start with complexity. Now, complexity of a system is not necessarily bad; the issues I take here are two: one is that your phone is not always streaming the audio from your phone to the Bluetooth device. This means that there is a slight lag between when you're phone detect audio to send and it actually being transmitted; therefore you miss the first several hundred milliseconds of audio. This is usually not a problem, but it does mean you might miss a word at the start of whatever you're listening to. If you decide to try to listen to Morse code, it will be impossible to decode because of this.
The second issue this causes is latency. If you're playing a game, or trying to send Morse code (yup, I'm a nerd, confirmed), you'll have a slight delay between when the button is pressed and audio is generated. This makes it immensely more difficult to play that game or send that code. Now I know my Morse code use is a minority use case for phones these days, but it's still a consideration of mine.
Finally, the issue with complexity is this Bluetooth headphones generate more E-waste. Wired headphones are basically just a bunch of wire, a magnet, a diaphragm with some casings \& cushioning. Wireless headphones have all that in addition to some PCB's, lithium batteries, and radio hardware. All of that adds up; it's reflected in both your environmental bill and your financial bill. In addition, I can easily send my wired headphones through a laundry cycle and have them come out OK; I dare you to try that with a set of Bluetooth headphones.
Power Use
On to power! I didn't bother to test myself, but from what I've read online, using Bluetooth will use ~2% more power. That's not a lot, but if you have a limited amount of power (like while out adventuring for days) then it matters. It also drains power whether or not you're actively listening to music. This is a small, yet clear win for wired headphones. In addition, to power wired headphones, you charge your phone battery; but to power Bluetooth headphones you have to charge both a phone battery and a headphone battery. What a (minor) annoyance!
I also appreciate the simplicity of the device that has the audio data generating the audio. If a simple option exists and there's not a compelling reason to move to a more complicated system, then use the simple option.
Privacy & Security
In regards to broadcasting to everyone in your vicinity, this would first appear to be a non issue. It's not causing any problems for anyone, so why should I care? This main concern I have around this is privacy. It's not hard to detect a Bluetooth signal and the things that identify your phone to other devices can be tracked. This already has implications with police surveillance using this to track people; warrantless.
There's also issues with corporate surveillance and dynamic pricing; some corporations are now tracking your location in the store. If they notice you spend a lot of time looking at cereal they can use that data to manipulate cereal prices, just for you. In addition, they'll sell that data and you'll probably get a lot of advertising around cereal.
Finally, there's also the issue that Bluetooth can be relatively insecure. (Highly recommend that article by the way!) If someone is intent on listening in on what you're listening to, they can figure it out. There's no way to intercept such a signal on wired headphones without you noticing.
Personally, I make a habit of turning off my phone's WiFi and Bluetooth radios when I'm out and about. It's not because I'm on the run or have something to hide, but rather this is information about myself I'm not willing to share freely with untrusted entities.
Compatibility
Finally, backwards compatibility. I resent the removal of 3.5mm aux ports from phones; it is easily the most convenient way to use a wired headphones and it's now gone. Now, I could understand maybe if it was replaced with a second USB-C port, but that's not the case. Perhaps I'm just the weirdo who wants his phone to be almost as usable as a laptop, but the removal of I/O ports from devices is really irritating; I don't use my device on it's own, it's often paired with other things like headphones, chargers, keyboards, dongles, etc.
Now, regardless of my love for wired devices, I can still appreciate Bluetooth from some things. One major advantage is that you are not tethered, by a wire, to your phone. You can plug in the phone, let it charge, while you are doing chores or whatever. Sometimes a wire is annoying to deal with, I concur. However, is it really that bad? We used portable devices with wired headphones for more than three decades; I don't think it's that terrible to use.
So, if you've abandoned wired headphones for Bluetooth, I suggest you give them a try for a little bit. You'll learn to work with the wire, your phone will have a little more battery life, you'll help the Earth a little, enjoy a little more privacy, and you (might) appreciate using a simpler system.
Rant over!